Welcome to my blog. Please drop me a line.

I am a freshman on blog. Here I come to show my story. All what I have already got, all what I have already lost.

Thursday, April 18, 2013

Why Spindle Motor of CNC Router become very hot in the beginning of work?


Why Spindle Motor of CNC Router become very hot in the beginning of work?


First to replace the bearings, iit is still hotplease check out one by one the following points.

1, To check the water cooling circulating well. If the temperature of the water is beyond 20 degrees,you can add ice in the water. While the air-cooled spindle possible blocked by the spindle blades.

2, To check the coil. Bearing bread produce a particular noise or the spindle refuses to move.

3, In fact, a bad bearings with bad-quality high-temperature lubricants will not works.

4, To check the speed of the spindle motor work is not close to the rated speed, while it heated by reaching its limit.

5, To check the if the CNC Router electricity resourceand the output frequency and current compliance required by the machine.

6, To check the spindle work. And make the spindle feeding less each step. To run the spindle feeding too hard is also a reason being heated.

Keyword: wood CNC router

Saturday, April 13, 2013

Operation Training of CNC Router


Operation Training of CNC Router

Following steps is CNC Router operation training .

1, The training must start from the theoretical training. The operator should read the manual  before operating It helps the operator mastering the operation and make progress with the training engineers.

2, Tool selection and installation applications. The operator should pay attention to the commonly used tools. He need to learn how to adjust the spindle motor speed and the gantry movement speed. When cutting hard materials, he master the cutting speed to prevent the cutting tools from breaking.

3, The characteristics of the processing material. The operator must be familiar with the various materials, and analysis the different thickness and different sizes as well as different hardness. So that find the most efficient operating parameters for processing the material to make a perfect sample.

4, The training of the software come after the above training. Software training mainly refer to the user applications lines. If the user promote the new products in the future, he can do their research based on the manual.
Software training includes: a variety of publishing software, all types of operations and the path generated and how to quickly identify the wrong path.

5, The training engineer estimate operator's machine working environment and endorsed the operational safety precautions.

6, Finally the training engineer will notice the various cautions and CNC router maintenance .



Tuesday, March 26, 2013

COMEID.COM -- New 4 Axis Violin Engraving Machine .

COMEID.COM -- Violin Engraving Machine .

 It specially designed for engraving violin head/ cello head / fiddle head. 
So the position control of the model is suitable for violin.
It is high precision model engraving machine.
4 pieces 2.2KW Spindle Motor working together.
Ball Screw and linear guide rail transmission.
POWERMILL software is good at programming the 3D violin head working path into G code.




Monday, March 25, 2013

LASER. World of Photonics China Shanghai 2013


LASER. World of Photonics China Shanghai



Laser World of Photonics China Shanghai start on 19th-21th in New International Expo Centre. It provides an opportunity to gain insight into the lastest technologies and applications in the complete range of electronics and to meet international experts.


As the fiber become hot in laser physics research, it is supposed to take full place of solid-laser to be a new laser generation.


COMEID fiber laser marking machine is develofed in cooperation with German and Britain laser companies by using the cutting edge technologies.


The advantage is as follows:


It adopt the imported laser generator and scanner guarantee the high efficiency of the electron-light transformation. To make less of power consumption while work high speed with less of total power.


Fiber is much smaller size than glass tube laser or solid laser. It represents high quality fine lined laser engraving and marking. So that it fit for joining an industrial production line.


The most adorable is that there is no consumption parts, no maintenance. And it air cooling itself while working in any circumstances.


Keywords: Fiber laser marking machine





Previous article:


Next article:

Friday, February 22, 2013

Various CNC Router Tools for Engraving and Cutting



CNC Router Tools for Engraving and Cutting
CNC Router tools is made for processing various materials. To realize the best processing result, it needs to choose a right
tool for a certain material. For advertising field, there are materials as wood, acrylic, organic glass, PVC, MDF, marble, glass,
Aluminum, brass, stainless steel, 2-color board and so on. Comeid company share some experience in CNC router tools application.
Previous article : http://www.comeid.com/eshownews.asp?/106.htm

                 
Single-blade
 cutter
Suit foracrylic, PVC, plastic, wood
Notice: slightness cutter edge isn’t suitable
 for cutting acrylicThis series tools is imported
 material , good quality blade, good for cutting
 acrylic and PVC
Blade dia: 3mmX17mm acrylic cutter
Blade dia:3mmX22mm  PVC  cutter
Blade dia: 4mmX22mm thick acrylic cutter
Blade dia:6mmX22mm thick acrylic cutter





Single-blade wood 
milling cutter








Suit for:woodenMDF
Common domestic quality











Ball milling cutter

Blade dia:3mmX17mm
Blade dia:  3mmX22mm
Blade dia:6mmX22mm








Suit for: engraving 3D pattern
Common domestic quality
Blade dia:3mmX17mm
Blade dia:3mmX22mm
Blade dia:6mmX22mm









Flat base sticker








Suit foracrylic, double-color board, PVC, 
hard wooden, MDF, 
Fine writing, fine article
Common domestic quality

Blade dia:3mm角度30° Tool nose:0.3
Blade dia:3mm角度45° Tool nose:0.3
Blade dia: 3mm角度60° Tool nose:0.3







Ball sticker


Blade dia:3mm角度30°Tool nose:0.3
Blade dia:3mm角度45° Tool nose:0.3
Blade dia:3mm角度60° Tool nose:0.3

Suit for: acrylic, double-color board, PVC, wooden, MDF, 
fine writing, fine article engraving.
Common domestic quality







Marble Special cutter





Suit for : marble 
Special material. Tool nose:diamond
Blade dia:6mm角度90° 
Tool nose:0.3








  • Special glass engraver 

    Suit for: glass
    Special material, tool nose:emery
    Blade dia:6mmX17mm







    Special woodworking
     milling cutter
    Suit for: wood cutting, milling
    Common domestic quality
    Blade dia:12.7mmX30mm












    Special woodworking 
    round botton milling
     cutter


    Suit for: wood cutting, milling, large 
    3D article engraving, rough engraving
    Common domestic quality
    Blade dia:12.7mmX30mm




Wednesday, February 20, 2013

Laser Cutting Machine - Cutting Acrylic with 2-3cm

COMEID Laser cutting machine equipped with AL-knife platform with three phase motors,and USB interface and LCD screen panel , and DSP fast control system. It cut acrylic of 2-3 cm thickness. Laser cutting speed is 2 mm /s. To know more in http://www.comeid.com/eshowshop.asp?/62.html


Laser Machine Mark the stainless steel spoons

This laser machine equipped with diode YAG tube can engrave the letter, Logo, and pattern on stainless steel. With the lowest cost, the machine reach the marking speed of 1.2m/s.